Do plantar flexor muscle structure and function contribute to medial tibial stress syndrome in long-distance runners? A case report.

Two long-distance runners developed MTSS (male age=26.3 years, female age=47.5 years) after baseline assessment of plantar flexor muscle structure and function and spatiotemporal running variables. B-mode ultrasound and lean leg girth characterized plantar flexor muscle structure. Hand-held dynamometry and a single-leg heel raise to failure protocol characterized plantar flexor muscle function. Finally, spatiotemporal running variables were determined during a treadmill protocol. The two runners who developed MTSS demonstrated less plantar flexor strength and endurance capacity than published comparative control data and marked variability in muscle structure. Reduced plantar flexor strength and endurance capacity were thought to contribute to an impaired ability to resist tibial bending moments during midstance due to earlier muscle fatigue. Earlier muscle fatigue could, in turn, contribute to increased tibial bending moments and MTSS development. Therefore, assessing plantar flexor muscle strength and endurance might help to identify athletes at risk of developing MTSS.

Marginal Bone Loss in Posterior Implants Placed at Different Levels and Different Prosthetic Designs: A Retrospective Study."

Various factors influence marginal bone loss following implant placement. This study explored the association between marginal bone loss and posterior implants positioned at different bone levels. Computer records and radiographs of patients with at least two adjacent implants were retrieved. Cases were categorized into non-splinted prosthesis and splinted prosthesis groups. Radiographic measurements were conducted at the time of abutment placement (T0), 1-3 years follow-up (T1), and the last visit (T2), measuring the vertical distance between adjacent implants. Multilevel linear regression models using generalized estimating equations were employed, with a significance level set at 5% (α=0.05). Fifty-six patient records were included, comprising 120 implants: 84 non-splinted (70%) and 36 splinted (30%). In the non-splinted group, marginal bone loss progression significantly depended on crestal height differences. For the mesial sides of posterior implants, marginal bone loss measured 1.0 ± 0.6 mm from T0 to T1, 2.4 ± 1.1 mm from T1 to T2, and 3.4 ± 1.2 mm from T0 to T2. Similarly, the distal sides of the most anteriorly placed implant exhibited marginal bone loss of 1.0 ± 0.7 mm from T0 to T1, 2.4 ± 1.0 mm from T1 to T2, and 3.5 ± 1.2 mm from T0 to T2. Non-splinted implants demonstrated a higher progression of marginal bone loss. This study suggests that non-splinted implants may lead to a more pronounced progression of marginal bone loss, particularly concerning crestal height differences, underscoring the need for further research.

Transference of outdoor gait-training to treadmill running biomechanics and strength measures: A randomized controlled trial.

Outdoor gait-training has been successful in improving pain and reducing contact time during outdoor running for runners with exercise-related lower leg pain (ERLLP). However, it is unclear if these adaptations translate to gold standard treadmill running and clinical strength assessments. The study purpose was to assess the influence of a 4-week outdoor gait-training intervention with home exercises (FBHE) on treadmill running biomechanics and lower extremity strength compared to home exercises alone (HE) among runners with ERLLP. Seventeen runners with ERLLP were randomly allocated to FBHE and HE groups (FBHE: 3 M, 6F, 23 ± 4 years, 22.0 ± 4.6 kg/m2; HE: 3 M, 5F, 25 ± 5 years, 24.0 ± 4.0 kg/m2). Both groups completed eight sessions of home exercises over 4 weeks. The FBHE group received gait-training through wearable sensors to reduce contact time. Treadmill running gait and clinical strength assessments were conducted at baseline and 4-weeks. Multivariate repeated measures analyses of variance were used to assess the influence of group and timepoint for all outcomes. The FBHE group demonstrated significantly decreased contact time at 4-weeks compared to baseline and the HE group (Mean Difference [MD] range: -42 ms - -39 ms; p-range: <0.001-0.02). The FBHE group had significantly increased cadence (MD: +21 steps/min; p = 0.003) and decreased loading impulse (MD: -51, p < 0.001) during treadmill running at 4-weeks compared to the HE group. Strength did not significantly differ adjusting for multiple comparisons (p > 0.007). The outdoor FBHE intervention transferred to favorable changes in treadmill running biomechanics. Clinicians treating runners with ERLLP patients should implement data-driven outdoor gait-training to maximize patient benefits across running locations.

Septoplasty and Nasal Packs From Otolaryngologists' Perspectives: A Cross-Sectional Survey.

Introduction Septoplasty is a commonly performed surgery by otolaryngologists. This study examines the routine use of non-absorbable nasal packs in the postoperative period in Kuwait. Our aim is to assess the views of otolaryngologists in Kuwait regarding the routine use of non-absorbable nasal packing after septoplasty with or without turbinoplasty. Materials and methods A cross-sectional study, an anonymous survey, consisting of 10 questions, using Google Forms was conducted. It was distributed via WhatsApp and in person hard copies to otolaryngologists - head and neck surgeons in Kuwait. Data were securely stored and analyzed using Stata (StataCorp LLC, College Station, Texas) software. Results Fifty participants have completed the survey. The majority were routinely performing septoplasty for a symptomatic deviated nasal septum (n= 47, 94%). Out of those, 43% (n = 21) usually use silastic splints to prevent postoperative complications, including bleeding, hematoma formation, and adhesions. The use of quilting sutures for the same purpose was done by 21% (n = 10), and 17% (n = 8) used non-absorbable nasal packs. Only two participants believed that no specific intervention was required. More than half used postoperative nasal packs in the case of intra-operative bleeding (n=26, 52%), while 18% (n = 9) believed that it is only necessary in selected cases with predisposing factors to bleeding. Ninety-two percent (n = 46) thought that pain and discomfort were associated with the use of non-absorbable nasal packs, and 50% (n = 25) believed that it could cause hemodynamic instability. Moreover, 66% (n = 33) agreed that quilting or trans-septal sutures can safely substitute nasal packs following septoplasty. Awareness of recent updates on the complications related to nasal packing varied, with more than half of the otolaryngologists being knowledgeable (n = 29, 58%). Discussion Septoplasty, a common surgical intervention for correcting a misaligned nasal septum, addresses various symptoms, such as nasal obstruction, obstructive sleep apnea, epistaxis, and headache. While the practice of nasal packing for 24-48 hours post-septoplasty is widespread, it remains a topic of controversy. Current literature supports the continued use of nasal packing for patients at high risk of bleeding. However, potential drawbacks, including increased pain, headache, and prolonged hospital stay, raise concerns about its overall benefits. An alternative approach, utilizing quilting sutures without nasal packs, has shown promising results in comparative studies, demonstrating less pain and minimal bleeding. Additionally, trans-septal sutures emerge as a safe alternative, minimizing dead space and reducing post-operative complications. Conclusion It appears that otolaryngologists in Kuwait have diverse opinions with regard to nasal packing following septoplasty. Further research is needed to establish evidence-based guidelines for this common procedure.

Clinical and electromyographic signals analysis about the effect of space-adjustment splint on overerupted maxillary molars.

BACKGROUND: Overerupted maxillary molars is common in adults, which can lead to insufficient intermaxillary vertical space ,great difficulty in prosthetic reconstruction ,and cause occlusal interference in movements.To reconstruct occlusal function, it is necessary to prepare enough space for prostheses. The aim of the present study was to evaluate the effect of space-adjustment occlusal splint on overerupted maxillary molars by clinical and electromyographic signals analysis. METHODS: Eighteen patients with overerupted maxillary molars were selected to wear space-adjustment occlusal splint suppressing overerupted maxillary molars for three months. Satisfaction was assessed by 5-point Likert; intermaxillary vertical space and the teeth transportation distance were measured in models; clinical periodontal status were evaluated by periodontal probing depth (PPT) and bleeding index (BI); electromyographic recordings of the masseter and anterior temporal muscles were monitored by Cranio-Mandibular K7 Evaluation System. RESULTS: All the patients were satisfied with the treatment effect (Likert scale ≧ 4). The intermaxillary space in edentulous areas after treatment showed statistically significant increasing when compared with those before treatment. PPT and BI showed no significant difference. No statistically significant differences were found in electromyographic activity of anterior temporal muscles, while a reduction of muscle activity in masseter in the contralateral side were detected in post-treatment evaluations compared with pre-treatment at mandibular rest position. CONCLUSIONS: Space-adjustment occlusal splint is an efficient treatment option on overerupted maxillary molars by intruding the maxillary molar to obtain adequate intermaxillary space for prostheses.

Wear resistance and flexural properties of low force SLA- and DLP-printed splint materials in different printing orientations: An in vitro study.

OBJECTIVES: To investigate the influence of material and printing orientation on wear resistance and flexural properties of one low force SLA- and two DLP-printed splint materials and to compare these 3D-printed splints to a subtractively manufactured splint material. METHODS: Two DLP-printed (V-Print splint, LuxaPrint Ortho Plus) and one low force SLA-printed (Dental LT Clear) material, where specimens were printed in three printing orientations (0°, 45°, 90°), were investigated. In addition, one milled splint material (Zirlux Splint Transparent) was examined. A total of 160 specimens were produced for both test series. The two-body wear test was performed in a chewing simulator (80'000 cycles at 50 N with 5-55 °C thermocycling). Steatite balls were used as antagonists. The wear pattern was analyzed with a 3D digital microscope in terms of maximum vertical intrusion depth (mm) and total volume loss (mm³). The flexural properties were investigated by three-point bending in accordance with ISO 20795-1: 2013 (denture base polymers). The flexural strength (MPa) and the flexural modulus (MPa) were measured. Two-way ANOVA was performed to investigate the effects of the two independent variables material and printing orientation for the three 3D-printed materials. The comparison of the printing orientations within one material was carried out with one-way ANOVA with post-hoc Tukey tests. RESULTS: Two-way ANOVA revealed that wear and flexural properties are highly dependent on the 3D-printed material (p < 0.001). Across groups, a significant effect was observed for wear depth (p = 0.031) and wear volume (p = 0.044) with regard to printing orientation but this was not found for flexural strength (p = 0.080) and flexural modulus (p = 0.136). One-way ANOVA showed that both DLP-printed groups showed no significant differences within the printing orientations in terms of wear and flexural properties. Dental LT Clear showed that 90° oriented specimens had higher flexural strength than 0° oriented ones (p < 0.001) and 45° oriented specimens also showed higher values than 0° ones (p = 0.038). No significant differences were observed within the printing orientations for flexural modulus and wear behaviour within this group. T-tests showed that the milled splints exhibited statistically higher wear resistance and flexural properties compared to all three 3D-printed splint materials (p < 0.001) and that highly significant differences were found between the 3D-printed splint materials for both test series. CONCLUSION: Within the limitations of this in vitro study, it can be stated that wear behaviour and flexural properties are highly dependent on the 3D-printed material itself. Currently, milled splints exhibit higher wear resistance and flexural properties compared to 3D-printed splint materials. The printing orientation has a minor influence on the properties investigated. Nevertheless, two-way ANOVA also showed a significant influence of printing orientation in the wear test across groups and one-way ANOVA detected significant effects for SLA material in terms of flexural strength, with printing in 90° showing the highest flexural strength. Therefore, anisotropy was found in SLA material, but it can be limited with the employed printing parameters. Both DLP-printed materials showed no significant difference within the printing orientation.

Sleep bruxism: The past, the present, and the future-evolution of a concept.

BACKGROUND: The concept of sleep bruxism (SB) has evolved exponentially over the past several decades. Many theories and hypotheses have been proposed as to the definition, pathophysiology, and management of SB, from the early 1960s through the present. The role of peripheral factors, such as dental occlusion, in the pathogenesis of SB has been discarded. TYPES OF STUDIES REVIEWED: The authors searched several electronic databases (ie, PubMed, Google Scholar, Web of Science, Embase, and Ovid MEDLINE) for studies on bruxism. The search was conducted from January 1961 through May 2023 and yielded 4,612 articles, of which 312 were selected for comprehensive review after eliminating duplicates and nonfocused articles. RESULTS: There has been an evident progressive shift from the role of peripheral factors, such as dental occlusion, to more central factors, such as the involvement of a central pattern generator as well as the autonomic nervous system, in the genesis of bruxing movements. There is continued robust interest in the dental community to elucidate the contributing factors involved in SB. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The neurophysiology of SB appears to be leaning more toward central rather than peripheral factors. There is increasing evidence of the role of the autonomic nervous system, genetics, and comorbidities in the genesis of SB. The scientific literature seems to refute the role of dental occlusion in the causation of bruxing movements. As per the literature, there has been a paradigm shift in the definition and genesis of SB and its possible dental implications and management, which also highlights the need for succinct scientific studies in this regard.

Treatment of painful temporomandibular joint disc displacement without reduction: network meta-analysis of randomized clinical trials.

There is currently no consensus on the best treatment for painful temporomandibular disc displacement without reduction (DDwoR), and no network meta-analysis (NMA) of randomized clinical trials (RCTs) comparing all types of treatments for this condition has been conducted. The objective of this study was to compare and rank all treatments for DDwoR, including conservative treatments, occlusal splints, low-level laser therapy (LLLT), arthrocentesis (Arthro) alone, Arthro plus intra-articular injection (IAI) of platelet-rich plasma (PRP), Arthro plus IAI of hyaluronic acid (HA), Arthro with exercises, Arthro plus occlusal splints, and manipulative therapy. Outcome variables were pain intensity on a visual analogue scale (VAS) and maximum mouth opening (MMO, mm). The mean difference with 95% confidence interval was estimated using Stata software. The GRADE system was used to assess the certainty of the evidence. A total of 742 patients from 16 RCTs were included in the NMA. Both direct meta-analysis and NMA showed that Arthro with IAI of co-adjuvants provided better pain reduction in the short term (≤3 months) than Arthro alone. However, the quality of the evidence was very low. In the intermediate term, Arthro alone or combined with co-adjuvants provided better pain reduction than conservative treatment, but with low-quality evidence. Conservative treatment significantly increased MMO in the short term compared to other treatments. In conclusion, the results of this NMA suggest that arthrocentesis with intra-articular injection of adjuvant medications may be superior to conservative treatments in reducing pain intensity at long-term follow-up, while no significant differences were found for the MMO outcome. However, the quality of evidence was generally low to very low, and further RCTs are needed to confirm these findings.

Cephalometric changes of pushing splints 3 compared to rapid maxillary expansion and facemask therapy on the airway space in class III growing patients: A randomized clinical trial.

BACKGROUND: Early orthopaedic treatment with rapid maxillary expansion (RME) associated with facemask (FM) has been shown to be effective in correcting Class III malocclusions in children. Treatment with pushing splints 3 (PS3) has shown to correct skeletal discrepancies in Class III growing patients. However, the effects of orthopaedic treatment on the upper airways in children with Class III malocclusion is controversial. OBJECTIVES: The aim of this study was to evaluate the cephalometric changes in the airways of PS3 compared to the RME/FM protocol. MATERIALS AND METHODS: In this study, 48 patients with Class III malocclusion (age range 5.5-8.5 years old) were selected for this study, and 24 were treated with PS3 appliance and 24 with RME/FM therapy. Lateral cephalograms before (T0) and at the end of the treatment (T1) were analysed to compare pharyngeal spaces. Paired and unpaired t tests were used for data analysis (P < .05). RESULTS: A total of 41 patients (21 patients for the PS3 group, 11 males and 10 females, mean age 7.0 ± 1.2 years; 20 patients for the RME/FM group, 10 males and 10 females, mean age 7.2 ± 1.3 years) were included. The results showed a statistically significant (P < .05) increase in the nasopharyngeal space after both therapies. However, the effects were similar considering that there were no differences between groups for the assessed variables at T0-T1. CONCLUSIONS: Early treatment of Class III malocclusion with PS3 does not induce a statistically significant increase in the sagittal airway space compared to RME/FM. The absence of untreated group could not define the role of growth in the increase of space.

Comparative analysis of different types of occlusal splints for the management of sleep bruxism: a systematic review.

BACKGROUND: Sleep bruxism is a prevalent condition in dentistry practice, characterized by involuntary grinding or clenching of the teeth during sleep. Several therapies, including occlusal splints, have been used to manage sleep bruxism and temporomandibular disorders, including occlusal splints. This study aimed to compare the effectiveness of different occlusal splints in managing sleep bruxism. METHODS: The PICO framework encompasses the characterization of the population, intervention, comparison, and pertinent outcomes. A comprehensive and systematic literature review was conducted on PubMed, Scopus, and Google Scholar to identify grey literature. The search specifically targeted scientific studies published before September 20, 2023. The Cochrane Collaboration Risk of Bias Tool assessed the accuracy of the included Randomized Control Trials (RCTs). The modified Newcastle-Ottawa Scale assessed non-randomized studies. Data were systematically extracted, synthesized, and reported thematically. RESULTS: Out of the total of 808 articles that were evaluated, only 15 articles were found to meet the specified inclusion criteria. Adjustable splints, such as full-occlusion biofeedback splints, were more effective in reducing sleep bruxism episodes, improving patient-reported symptoms, and enhancing overall well-being. The impact of different occlusal sprints on electromyographic activity varies, and potential adverse effects should be considered individually. CONCLUSIONS: This review provides valuable insights into the effectiveness of occlusal splints in managing sleep bruxism. The results of this study indicate that occlusal splint therapy is a viable treatment approach for sleep bruxism.

Additional splint therapy has no superiority in myogenic temporomandibular disorders: A systematic review and meta-analysis of randomized controlled trials.

Purpose Temporomandibular disorders (TMDs) are frequent stomatological disorders. However, their treatment is controversial. Therefore, we compared the efficacy of combination therapy (splint therapy along with physiotherapy, manual therapy, and counseling) with physiotherapy, manual therapy, and counseling alone. The extent of mouth opening and pain perception were the outcomes.Study selection Systematic searches for English publications were performed using four major literature databases (Cochrane Library, EMBASE, PubMed, and Web of Science). We included randomized controlled trials. We calculated mean differences with 95% confidence interval (CI) for pain perception and maximum mouth opening (MMO) for the two groups. The Hartung-Knapp adjustment was used for cases comprising at least five studies.Results Six articles were included in the pain perception category, and four were reviewed for MMO at baseline. Four articles assessed pain perception, and two assessed MMO at 1 month. Five articles were analyzed upon comparing pain perception at baseline and 1-month follow-up. The mean difference was -2.54 [95% CI: -3.38; to -1.70] in the intervention group and -2.33 [95% CI: -4.06; to -0.61] in the control group. Two articles were analyzed upon comparing MMO at baseline and 1-month follow-up. The mean difference in the intervention group was 3.69 [95% CI: -0.34; 7.72], whereas that in the control group was 3.62 [95% CI: -3.43; 10.67].Conclusions Both therapies can be used in the management of myogenic TMD. Due to the marginal differences between the baseline and 1-month values, our results could not confirm the efficacy of combination therapy.

Treatments for painful temporomandibular disc displacement with reduction: a network meta-analysis of randomized clinical trials.

There is currently no consensus on the best treatment for painful temporomandibular disc displacement with reduction (DDwR), and no network meta-analysis of randomized clinical trials (RCTs) comparing all types of treatment for this condition has been conducted. The objective of this study was to compare and rank all treatments for DDwR, including conservative treatments, occlusal splints, low-level laser therapy (LLLT), manual therapy, no treatment (control), arthrocentesis (Arthro) alone, Arthro plus intra-articular injection of platelet-rich plasma (Arthro-PRP) or hyaluronic acid (Arthro-HA), and Arthro plus occlusal splint. Predictor variables were pain intensity and maximum mouth opening (MMO). The mean difference with 95% confidence interval was estimated using Stata software. The GRADE system was used to assess the certainty of the evidence. Twenty RCTs reporting 1107 patients were identified in the literature search; 980 of these patients were included in the network meta-analysis. Direct meta-analysis showed that Arthro-PRP significantly reduced pain intensity compared to Arthro alone, while occlusal splint and manual therapy were superior to conservative treatment (all very low quality evidence). Arthro with intra-articular injection of PRP/HA ranked as the most effective treatment in terms of pain reduction, whereas LLLT ranked the best choice for increasing MMO for patients with DDwR. However, it is important to note that the evidence for the superiority of these treatments is generally of very low quality. Therefore, further high-quality research is needed to confirm these findings and provide more reliable recommendations for the treatment of DDwR.

A 3D Finite Element Analysis of biomechanical effects on teeth and bone during true intrusion of posteriors using miniscrews.

OBJECTIVE: The primary objective of this study was to investigate the biomechanical effects and stresses on bone, PDL, cementum and displacement along X-,Y- and Z-axis during true intrusion of molars using mini-implants with finite element analysis; the secondary objective of the study was to find out the best method for posterior intrusion in clinical practice. MATERIAL AND METHODS: A 3D finite element method was used to simulate true molar intrusion using sliding mechanics. Two groups were made, with mini-implants placed on buccal side and palatal side with a cap splint for MODEL1, and a single mini-implant placed buccally with transpalatal arch (TPA) for MODEL2. The material characteristics which include the Young's modulus and Poison's ratio were assigned. von Mises stress, principal stress on PDL and alveolar bone, displacements in all the 3 planes were determined. RESULTS: Bone stress patterns showed compressive stresses on the buccal aspect and tensile stresses on the palatal aspect for both MODELS. Stresses in the PDL and cementum were mainly concentrated in the apex region, with a more uniform distribution of stresses for MODEL 1. Tooth displacement showed true intrusion for both MODELS, i.e. the Z axis, and a more controlled buccal tipping for MODEL 1. CONCLUSION: Of the modalities compared, the best controlled tooth movements for posterior intrusion in the treatment of open bite were obtained with mini-implants placed with a cap splint (MODEL 1).

The use of different intranasal splints Doyle splints versus Reuter bivalve splints versus no splints in primary septal surgeries: A randomised clinical trial looking at morbidity.

OBJECTIVE: The objective of this study is to compare the morbidity of different types of intranasal splints (Doyle splints and Reuter bivalve splints) with no intranasal splints in primary septal surgeries and concomitant submucosal reduction of the inferior turbinate. DESIGN: Randomised clinical trial SETTING: Single-Center trial at a tertiary care facility PARTICIPANTS: In this randomised clinical trial, 123 consecutive patients underwent primary septoplasty with bilateral submucosal reduction of the inferior turbinate, with no other concurrent procedure. Patients were randomised into three groups: Doyle splints, Reuter bivalve splints and patients with no splints placed. MAIN OUTCOME MEASURES: Following surgery, the patients were seen at three consecutive visits. During each visit, the Visual Analogue Scale score for headache, nasal obstruction, overall pain and bleeding and an endoscopic score for secretions, oedema and synechiae was filled. RESULTS: Patients were randomised into three groups, 42 received Doyle splints, 41 Reuter bivalve splints and 40 had no splints inserted. When comparing the three groups, the first two post-op visits were scheduled significantly earlier in patients with splints (p < .05). The scores from both groups with splints were statistically higher for headache, nasal obstruction and pain, for the first visit only (p < .05). There was no statistical difference between groups when looking at each subset of the endoscopic score, at each visit (p > .05). CONCLUSION: Increased post-operative pain, headaches and nasal obstruction scores were encountered in patients who had splints after surgery. However, endoscopic scores were statistically similar across the three groups with no difference in post-operative endoscopic scores at each visit. and no difference was seen in symptom scores and endoscopic scores between patients with different splints.

Neuromodulation of the median nerve in carpal tunnel syndrome, a single-blind, randomized controlled study.

Background: This study aimed to evaluate the efficacy of pulsed radiofrequency applied using transcutaneous electrodes in carpal tunnel syndrome (CTS). Methods: After randomization, the patients received two cycles of noninvasive pulsed radiofrequency (NiPRF), once weekly, or splinting (the control group) for three months. Clinical evaluations were recorded at baseline and weeks 4 and 8. The Boston Carpal Tunnel Syndrome Questionnaire (BCTQ) was used to determine the functional status and symptom severity. Results: Sixty-two patients were followed up for three months. There was no difference between the groups in the BCTQ scores before and after treatment. The NiPRF group found a significant difference between the BCTQ measurements at all time intervals (paired sample t -test; P < 0.001). In the splint group, there was a significant difference only between the basal-1st month and basal-3rd month (paired samples t -test; P < 0.001). The main effect of the time variable was statistically significant (ANOVA; P < 0.001), but the group variable was not. There was no correlation between the BCTQ results measured at any time and the electroneuromyelogragphy findings in either group. Conclusions: NiPRF effectively improves symptoms and functionality in patients with CTS for up to 3 months. Thus, NiPRF can be considered an easy, safe, and useful alternative treatment modality for CTS.

Predictive factors of therapeutic response according to craniofacial skeletal biotype in patients with sleep apnea syndrome using mandibular advancement devices: a pilot study.

OBJECTIVES: To evaluate the influence of facial biotype in the therapeutic effect of mandibular advancement devices (MADs) according to polysomnographic records in patients diagnosed with sleep apnea-hypopnea syndrome (SAHS). MATERIALS AND METHODS: A total of 46 patients were recruited. Patients were classified according to facial biotype (mesofacial, brachyfacial, or dolichofacial). The quantitative variables were described as the arithmetic mean and standard deviation or the median and interquartile range. Hypothesis tests used were Pearson's chi-square, paired-sample Student's t- test, the Wilcoxon test, one-way analysis of variance, Kruskal-Wallis test, and Mann-Whitney U-test. P < .05 was considered statistically significant. RESULTS: A total of 46 patients were categorized into three facial biotype subgroups with no significant differences among them in age, body mass index, neck circumference, and sex. The respiratory disturbance index (RDI) results were as follows: brachyfacial patients had a reduction to 15 events/h (P < .001), the mesofacial patients had a reduction to 14 events/h (P < .001), and the dolichofacial patients did not show a significant reduction. The oxygen desaturation index (ODI) results were as follows: brachyfacial patients had a reduction in ODI episodes to 45 episodes/h (P = .001), mesofacial patients had a reduction to 18 episodes/h (P = .001). In the brachyfacial group, the number of awakenings with MAD therapy was reduced to 23 events/h (P = .003), while, in the mesofacial group, it was reduced to 37 episodes/h (P = .012). CONCLUSIONS: The facial biotype influences the effectiveness of MAD therapy and is considered a good predictive factor.

Effect of occlusal stabilisation splint with or without arthroscopic disc repositioning on condylar bone remodelling in adolescent patients.

The aim of this study was to investigate the treatment effects of a stabilisation splint (SS) with and without arthroscopic disc repositioning (ADR) on condylar bone remodelling in adolescent patients with anterior disc displacement without reduction (ADDwoR). Cone beam computed tomography and magnetic resonance imaging were used to analyse condylar bone remodelling, condyle position, and disc position. Twenty-two temporomandibular joints of 14 patients who underwent ADR (age range 12-20 years; mean follow-up 12.5 ± 7.8 months) and 21 temporomandibular joints of 14 patients who did not undergo ADR (age range 13-20 years; mean follow-up 11.1 ± 5.1 months) were included. The change in bone volume (P < 0.001), rate of bone volume change (P < 0.001), and change in condyle height (P = 0.031) were significantly greater in patients with ADR than in those without ADR. The changes in posterior joint space (P = 0.013), superior joint space (P = 0.020), and ratio of condyle sagittal position (P = 0.013) were significantly greater in patients with ADR than in those without ADR. All discs in patients who underwent ADR and one disc in those who did not undergo ADR were backward repositioned. In conclusion, in adolescent patients with ADDwoR, ADR with SS therapy achieved better condyle and disc position than SS therapy alone, and also induced bone generation.

Prophylactic antibiotics in septoplasty with intranasal septal splints: A comparative analysis.

OBJECTIVES: Postoperative antibiotic therapy is a common practice following septoplasty with intra-septal splints placement (ISS), even though there is a lack of evidence to support it. We sought to investigate the role of antibiotic therapy in septal surgeries with the placement of ISS. DESIGN: A retrospective comparative study was conducted using the electronic charts of adult patients who underwent septoplasty with the placement of ISS with or without turbinate reduction. Nasal cultures were taken routinely during surgery as part of the department's protocol for monitoring infectious diseases. The ISS were also routinely examined for the presence of bacteria after their removal on the eighth day following surgery. SETTING: A large otolaryngology department in a tertiary medical center. PARTICIPANTS: Adult patients who underwent septoplasty in our institution. MAIN OUTCOME MEASURES: We analyzed all post-operative infections to search for risk factors in the cohort. RESULTS: Post-operative infection rates following septoplasty with ISS were low at 6%, which is consistent with previously published rates. Infection rates were significantly higher in patients who were not treated with antibiotics (OR = 8.2, 95%CI: 1.63-41.1; p = .01, φ = 0.04). Diabetes was associated with an increased risk of postoperative infection regardless of prophylactic antibiotic therapy (OR = 5.2, 95%CI: 1.15-23.5; p = .032, φ = .04). The detection of Klebsiella pneumonia before surgery was associated with an increased rate of postoperative infection (OR = 16.6, 95%CI: 3.02-91.54; p = .001, φ = 0.12). CONCLUSIONS: Patients undergoing septoplasty with the placement of ISS are at increased risk of gram-negative bacterial colonisation, and development of postoperative nasal infection. A single preoperative dose of IV antibiotic therapy should be considered a potential prophylactic option for septoplasty with ISS.

Efficiency of mixed and rigid occlusal stabilization splints: Randomized clinical trial

Abstract Occlusal stabilization splints are the most common treatment for controlling the deleterious effects of sleep bruxism. This study aimed to evaluate the effectiveness of a low-cost, mixed occlusal splint (MOS) compared to that of a rigid splint. A randomized clinical trial was performed on 43 adults of both sexes with possible sleep bruxism and satisfactory dental conditions. They were divided into rigid occlusal splint (ROS) (n = 23) and MOS (n = 20) groups. Masticatory muscle and temporomandibular joint (TMJ) pain intensity (visual analog scale), quality of life (WHOQOL-BREF), indentations in the oral mucosa, anxiety, and depression (HADS), number of days of splint use, and splint wear were evaluated. All variables were evaluated at baseline (T0), 6 months (T6), and 12 months (T12) after splint installation (T0), and splint wear was evaluated at T6 and T12. Student's t-test, Mann-Whitney U test, non-parametric Friedman's analysis of variance for paired samples and pairwise multiple comparisons, Pearson's chi-square test, two-proportion z-test, non-parametric McNemar's and Cochran's Q, and Wilcoxon tests were used (p < 0.05). In both groups, there was a decrease in TMJ pain and pain intensity over time and improvements in the quality of life scores. At T6, there was a higher rate of splint wear in the MOS group than in the ROS group (p = 0.023). The MOS showed a higher rate of wear than the rigid splint but had similar results for the other variables. Therefore, the use of a mixed splint appears to be effective in controlling the signs and symptoms of sleep bruxism.

Are Virtually Designed 3D Printed Surgical Splints Accurate Enough for Maxillary Reposition as an Intermediate Orthognathic Surgical Guide.

Background and Aim: The accuracy of the virtually-designed 3D-printed surgical splints requires investigation for the practical use of surgical plan in the operating room. This study aimed to compare the validity of the 3D-printed and the conventional intermediate splints and evaluate the outcomes after the surgical application of the 3D-printed splint compared with the predicted values. Methods: In this study, ten patients with dentofacial deformity were recruited. Participants were analyzed by the conventional surgical planning and virtual surgical planning. The intermediate surgical splints were created by the conventional and 3D-printing methods. Maxillary movements in 3 spatial directions were measured in an articulator after the application of both splints. Correlation and agreement between the two methods were tested by intraclass correlation coefficient (ICC). After the confirmation of 3D printed splint validity for each patient, the surgery was performed using 3D printed splints. It is assumed that ideally cephalometric prediction values are going to be obtained using conventional acrylic splints (gold standard). So, as a second objective, the outcome of the surgically-applied 3D-printed splint was evaluated and compared with the predicted values and finally analyzed by the paired t-test. Results: Based on the observations, there was an excellent agreement between the virtually-designed 3D-printed and conventional intermediate surgical splints (ICC ranged between 0.83 and 0.99 for linear values). There was a good cumulative agreement of ICC greater than 0.80. Overall, the mean linear measurements were not different between conventional and 3D-printed splint on the articulator. Also, there were no significant differences between the linear and angular measurements of 2D-cephalometric prediction and postoperation values. Conclusion: The results showed cautiously the acceptable accuracy of the 3D-printed splints for several parameters in three spatial dimensions within the laboratory and clinical settings.